Command-Line Interface

Synopsis

This document describes how command-line interface (CLI) works on a high-level, for an application. A separate document for implementing a CLI for a Cosmos SDK module can be found here.

Command-Line Interface

Example Command

There is no set way to create a CLI, but Cosmos SDK modules typically use the Cobra Library. Building a CLI with Cobra entails defining commands, arguments, and flags. Commands understand the actions users wish to take, such as tx for creating a transaction and query for querying the application. Each command can also have nested subcommands, necessary for naming the specific transaction type. Users also supply Arguments, such as account numbers to send coins to, and Flags to modify various aspects of the commands, such as gas prices or which node to broadcast to.

Here is an example of a command a user might enter to interact with the simapp CLI simd in order to send some tokens:

simd tx bank send $MY_VALIDATOR_ADDRESS $RECIPIENT 1000stake --gas auto --gas-prices <gasPrices>

The first four strings specify the command:

• The root command for the entire application simd.
• The subcommand tx, which contains all commands that let users create transactions.
• The subcommand bank to indicate which module to route the command to (x/bank module in this case).
• The type of transaction send.

The next two strings are arguments: the from_address the user wishes to send from, the to_address of the recipient, and the amount they want to send. Finally, the last few strings of the command are optional flags to indicate how much the user is willing to pay in fees (calculated using the amount of gas used to execute the transaction and the gas prices provided by the user).

The CLI interacts with a node to handle this command. The interface itself is defined in a main.go file.

Building the CLI

The main.go file needs to have a main() function that creates a root command, to which all the application commands will be added as subcommands. The root command additionally handles:

• setting configurations by reading in configuration files (e.g. the Cosmos SDK config file).
• adding any flags to it, such as --chain-id.
• instantiating the codec by injecting the application codecs. The codec is used to encode and decode data structures for the application - stores can only persist []bytes so the developer must define a serialization format for their data structures or use the default, Protobuf.
• adding subcommand for all the possible user interactions, including transaction commands and query commands.

The main() function finally creates an executor and execute the root command. See an example of main() function from the simapp application:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/main.go#L12-L24

The rest of the document will detail what needs to be implemented for each step and include smaller portions of code from the simapp CLI files.

Adding Commands to the CLI

Every application CLI first constructs a root command, then adds functionality by aggregating subcommands (often with further nested subcommands) using rootCmd.AddCommand(). The bulk of an application's unique capabilities lies in its transaction and query commands, called TxCmd and QueryCmd respectively.

Root Command

The root command (called rootCmd) is what the user first types into the command line to indicate which application they wish to interact with. The string used to invoke the command (the "Use" field) is typically the name of the application suffixed with -d, e.g. simd or gaiad. The root command typically includes the following commands to support basic functionality in the application.

• Status command from the Cosmos SDK rpc client tools, which prints information about the status of the connected Node. The Status of a node includes NodeInfo,SyncInfo and ValidatorInfo.
• Keys commands from the Cosmos SDK client tools, which includes a collection of subcommands for using the key functions in the Cosmos SDK crypto tools, including adding a new key and saving it to the keyring, listing all public keys stored in the keyring, and deleting a key. For example, users can type simd keys add <name> to add a new key and save an encrypted copy to the keyring, using the flag --recover to recover a private key from a seed phrase or the flag --multisig to group multiple keys together to create a multisig key. For full details on the add key command, see the code here. For more details about usage of --keyring-backend for storage of key credentials look at the keyring docs.
• Server commands from the Cosmos SDK server package. These commands are responsible for providing the mechanisms necessary to start an ABCI CometBFT application and provides the CLI framework (based on cobra) necessary to fully bootstrap an application. The package exposes two core functions: StartCmd and ExportCmd which creates commands to start the application and export state respectively. Learn more here.
• Transaction commands.
• Query commands.

Next is an example rootCmd function from the simapp application. It instantiates the root command, adds a persistent flag and PreRun function to be run before every execution, and adds all of the necessary subcommands.

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L47-L130

tip

Use the EnhanceRootCommand() from the AutoCLI options to automatically add auto-generated commands from the modules to the root command. Additionnally it adds all manually defined modules commands (tx and query) as well. Read more about AutoCLI in its dedicated section.

rootCmd has a function called initAppConfig() which is useful for setting the application's custom configs. By default app uses CometBFT app config template from Cosmos SDK, which can be over-written via initAppConfig(). Here's an example code to override default app.toml template.

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L144-L199

The initAppConfig() also allows overriding the default Cosmos SDK's server config. One example is the min-gas-prices config, which defines the minimum gas prices a validator is willing to accept for processing a transaction. By default, the Cosmos SDK sets this parameter to "" (empty string), which forces all validators to tweak their own app.toml and set a non-empty value, or else the node will halt on startup. This might not be the best UX for validators, so the chain developer can set a default app.toml value for validators inside this initAppConfig() function.

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L164-L180

The root-level status and keys subcommands are common across most applications and do not interact with application state. The bulk of an application's functionality - what users can actually do with it - is enabled by its tx and query commands.

Transaction Commands

Transactions are objects wrapping Msgs that trigger state changes. To enable the creation of transactions using the CLI interface, a function txCommand is generally added to the rootCmd:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L222-L229

This txCommand function adds all the transaction available to end-users for the application. This typically includes:

• Sign command from the auth module that signs messages in a transaction. To enable multisig, add the auth module's MultiSign command. Since every transaction requires some sort of signature in order to be valid, the signing command is necessary for every application.
• Broadcast command from the Cosmos SDK client tools, to broadcast transactions.
• All module transaction commands the application is dependent on, retrieved by using the basic module manager's AddTxCommands() function, or enhanced by AutoCLI.

Here is an example of a txCommand aggregating these subcommands from the simapp application:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L270-L292

tip

When using AutoCLI to generate module transaction commands, EnhanceRootCommand() automatically adds the module tx command to the root command. Read more about AutoCLI in its dedicated section.

Query Commands

Queries are objects that allow users to retrieve information about the application's state. To enable the creation of queries using the CLI interface, a function queryCommand is generally added to the rootCmd:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L222-L229

This queryCommand function adds all the queries available to end-users for the application. This typically includes:

• QueryTx and/or other transaction query commands from the auth module which allow the user to search for a transaction by inputting its hash, a list of tags, or a block height. These queries allow users to see if transactions have been included in a block.
• Account command from the auth module, which displays the state (e.g. account balance) of an account given an address.
• Validator command from the Cosmos SDK rpc client tools, which displays the validator set of a given height.
• Block command from the Cosmos SDK RPC client tools, which displays the block data for a given height.
• All module query commands the application is dependent on, retrieved by using the basic module manager's AddQueryCommands() function, or enhanced by AutoCLI.

Here is an example of a queryCommand aggregating subcommands from the simapp application:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L249-L268

tip

When using AutoCLI to generate module query commands, EnhanceRootCommand() automatically adds the module query command to the root command. Read more about AutoCLI in its dedicated section.

Flags

Flags are used to modify commands; developers can include them in a flags.go file with their CLI. Users can explicitly include them in commands or pre-configure them by inside their app.toml. Commonly pre-configured flags include the --node to connect to and --chain-id of the blockchain the user wishes to interact with.

A persistent flag (as opposed to a local flag) added to a command transcends all of its children: subcommands will inherit the configured values for these flags. Additionally, all flags have default values when they are added to commands; some toggle an option off but others are empty values that the user needs to override to create valid commands. A flag can be explicitly marked as required so that an error is automatically thrown if the user does not provide a value, but it is also acceptable to handle unexpected missing flags differently.

Flags are added to commands directly (generally in the module's CLI file where module commands are defined) and no flag except for the rootCmd persistent flags has to be added at application level. It is common to add a persistent flag for --chain-id, the unique identifier of the blockchain the application pertains to, to the root command. Adding this flag can be done in the main() function. Adding this flag makes sense as the chain ID should not be changing across commands in this application CLI.

Environment variables

Each flag is bound to its respective named environment variable. Then name of the environment variable consist of two parts - capital case basename followed by flag name of the flag. - must be substituted with _. For example flag --node for application with basename GAIA is bound to GAIA_NODE. It allows reducing the amount of flags typed for routine operations. For example instead of:

gaia --home=./ --node=<node address> --chain-id="testchain-1" --keyring-backend=test tx ... --from=<key name>

this will be more convenient:

# define env variables in .env, .envrc etc
GAIA_HOME=<path to home>
GAIA_NODE=<node address>
GAIA_CHAIN_ID="testchain-1"
GAIA_KEYRING_BACKEND="test"

# and later just use
gaia tx ... --from=<key name>

Configurations

It is vital that the root command of an application uses PersistentPreRun() cobra command property for executing the command, so all child commands have access to the server and client contexts. These contexts are set as their default values initially and may be modified, scoped to the command, in their respective PersistentPreRun() functions. Note that the client.Context is typically pre-populated with "default" values that may be useful for all commands to inherit and override if necessary.

Here is an example of an PersistentPreRun() function from simapp:

https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/simd/cmd/root_v2.go#L81-L120

The SetCmdClientContextHandler call reads persistent flags via ReadPersistentCommandFlags which creates a client.Context and sets that on the root command's Context.

The InterceptConfigsPreRunHandler call creates a viper literal, default server.Context, and a logger and sets that on the root command's Context. The server.Context will be modified and saved to disk. The internal interceptConfigs call reads or creates a CometBFT configuration based on the home path provided. In addition, interceptConfigs also reads and loads the application configuration, app.toml, and binds that to the server.Context viper literal. This is vital so the application can get access to not only the CLI flags, but also to the application configuration values provided by this file.

tip

When willing to configure which logger is used, do not use InterceptConfigsPreRunHandler, which sets the default SDK logger, but instead use InterceptConfigsAndCreateContext and set the server context and the logger manually:

-return server.InterceptConfigsPreRunHandler(cmd, customAppTemplate, customAppConfig, customCMTConfig)

+serverCtx, err := server.InterceptConfigsAndCreateContext(cmd, customAppTemplate, customAppConfig, customCMTConfig)
+if err != nil {
+   return err
+}

+// overwrite default server logger
+logger, err := server.CreateSDKLogger(serverCtx, cmd.OutOrStdout())
+if err != nil {
+   return err
+}
+serverCtx.Logger = logger.With(log.ModuleKey, "server")

+// set server context
+return server.SetCmdServerContext(cmd, serverCtx)